Magnet RFQ Requirement Checklist

A drawing-based quote starts from the part, the magnet direction, the field you are aiming for and the conditions it runs in. Tick what your project already has and the list shows what is still open.

Discuss your project

An item you cannot answer yet can be sent as an open question in the inquiry.

Assembly workshop with benches and equipment along a central aisle – NEOLUNE MAGNETS.

Build your project list

Choose the component family, then tick the items you can already describe. Everything you leave unticked is shown as an open item.

Component family
What your project has
  • Geometry, dimensional limits and the mounting interfaces that locate the assembly.

  • Direction for each magnet or the array layout, including segmented magnetisation where it applies.

  • The field you need in the working region.

  • Working air gap and the space available for the assembly.

  • Application, working temperature, speed where relevant and the surrounding environment.

  • The coating you need and what the part is exposed to.

  • Prototype quantity and the production quantity you expect.

  • The checks and the kind of batch record you want to agree.

Your list

0 of 8 items ready

  • DrawingOpen
  • Magnetisation directionOpen
  • Magnetic field targetOpen
  • Air gap and fitOpen
  • Operating conditionsOpen
  • Coating or protectionOpen
  • QuantityOpen
  • Acceptance requirementsOpen

Family: 3C magnetic components

How to use the list

What the list covers

It names the inputs a drawing-based quote starts from, so you can see what your own file already holds.

Items that are still open

An open item is not a blocker. Say in the inquiry that it is not decided yet and it becomes part of the design discussion.

What the list does not decide

It does not choose a grade, a coating specification or an assembly route. Those follow from the drawing, the field target and the operating conditions.

Discuss your engineering requirements

Share your drawing, magnetic field target, operating conditions and quantity to begin the component review.

Get a Quote

Submit your inquiry using the form. Email drawings to sales@neolune.com.